Spalding M7900412 - Manual (Page 8)

8
ID# M7900412 05/06
Place a special locking nut (25) approximately half-way up on each carriage bolt (2) as shown.
Keep the two special locking nuts (25) at the same level.
NOTE: COMPLETED ASSEMBLY
2
25
4.
RIM ASSEMBLY & INSTALLATION
1
3
2
24
4
Install two carriage bolts (2) through rim (1), washers (3), and lock washers (24) as shown.
Tighten nuts (4) completely.
Perform this step twice
as it is applied to both
holes of rim bracket
shown
NOTE:
NOTE: COMPLETED ASSEMBLY
3.