Siemens Hicom 118 - Manual (Page 29)

29
Programming of Keys
Spare keys on the optiset E telephone and on the add-on Key Module are
available for programming of direct dialling numbers, internal or external.
Hicom Function keys
These keys are programmable by yourself for any frequently required
Hicom features.
Programme Function keys
- dial
∗∗∗∗∗
91
- press required key to be programmed
- press
✔ ✔ ✔ ✔ ✔ to change feature?
- scroll to required function
- press
✔ ✔ ✔ ✔ ✔ key to confirm
- press ✔ ✔ ✔ ✔ ✔ key to confirm save option
Speed Dial keys
These keys are available for programming of internal numbers,
Once an extension number has been programmed the LED will indicate
the status of the extension i.e. busy or free.
These keys can be used to pick up calls that flash on them if your phone
is free.
Programme Speed Dial keys (Any destination)
- dial
∗∗∗∗∗
91
- press required key to be programmed
- press
✔ ✔ ✔ ✔ ✔ to change feature?
- scroll to prog. rep. key
- press ✔ ✔ ✔ ✔ ✔ key to confirm
- dial required external number preceded by 0 or extension number
- press
✔ ✔ ✔ ✔ ✔ key to save entry
- press ✔ ✔ ✔ ✔ ✔ key to confirm save option
Dial Speed Dial Numbers
- press required Speed Dial key
- wait whilst system dials the number