Sony CMD MZ5 - Manual (Page 22)

22
SECTION 6
PROGRAMMING INSTRUCTIONS
6.1 Requirement
•
PC (486 type or higher) with Microsoft “Windows” Operating System
•
One COM-port free for usage
•
The Data Transfer Jig (unit: p/n 1-792-172-11)
PREPARATION FOR SOFTWARE UPDATE
6.2 Hardware set-up
•
Copy all the files to the PC (define own directory).
•
Connect the Data Transfer Jig to the PC COM-port (COM 1 or COM 2) and the CMD-MZ5 external connector.
•
Attach battery pack to CMD-MZ5; the CMD-MZ5 is powered up from the battery pack.
•
The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly
advisable to check the settings first (see 6.3 Software set-up).
6.3 Software set-up
6.3.1
∗
Download Software to Mobile (Software Update)
•
Start the program flash.exe by double-clicking on its icon in the Windows Explorer.
•
Check if the settings for the “Com Port”, “Speed” and “Load Option” are correct.
Com Port : COM 1
Baud Rate : 115200
Load Option : DOWNLOAD TO MOBILE
MZ5 Flash.exe
DATA
TRANSFER
JIG