Sony CMD MZ5 - Manual (Page 23)

23
Settings can be saved to “flash.ini” in the windows directory.
•
Click on “Start” and select an SRE file for downloading.
−
The CMD-MZ5 software is located in the MZ5. SRE file.
−
Any other SRE file is either only needed for the program itself, or can be a personal data file (see below).
There are 3 kinds of SRE files: - “MZ5.sre” for actual software download
- “xxx.sre” for personal data download (see blow)
- “ flash.sre” is an application software (do not use / modify)
−
Flash erase area is automatically calculated with the contents of the life.
•
Switch on the CMD-MZ5.
•
Now the program run automatically.
6.3.2
∗
Save Personal Data in Mobile
The set-up and all requirements for this data transfer are the same as for the software update.
•
Check if the settings for the “Com Port”, “Speed” and “Load Option” are correct.
Com Port : COM 1
Speed : 115200
Load Option : SAVE DATA FROM MOBILE
•
Click on “Start”
•
Select or input file to save data.
•
Switch on the CMD-MZ5.
•
Save read data in the selected file.
The read data can be downloaded to the Mobile with this loader as described above.