Sun Microsystems Sun FastEthernet PCI Adapter 805-1759-10 - Manual (Page 24)

12 Sun FastEthernet PCI Adapter Installation and User’s Guide • July 1997
2. Create an appropriate entry in the /etc/hosts file for each active hme channel.
Using the example in Step 1, you will have:
Booting from the Network
You can use the Sun FastEthernet PCI Adapter interface as the boot device for your
system.
▼ To Boot from the Network
1. At the ok prompt, type:
The show-devs command lists the system devices. You should see the full path
name of the hme device, similar to this example:
2. Type:
zardoz # cat /etc/hosts
...
127.0.0.1 localhost
129.144.10.57 zardoz loghost
129.144.11.83 zardoz-1
ok show-devs
/pci@1f,2000/SUNW,hme@1,1
ok boot /pci@1f,2000/SUNW,hme@1,1