Sharp MD-MT180H - Manual (Page 21)

01/10/5 180H_E_4.fm
E-20
MD-MT180H
ENGLISH
Useful Feat
ures
-A
d
v
a
n
c
e
d Re
c
o
rd
ing-

Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronised recording).
To interrupt recording

When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.

If a silence lasts for 3 seconds or more, the recording
will be paused (pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording auto-
matically starts.

A new track number is created when the recording
resumes.
1
Press the REC button.
2
Begin playback on the stereo system connected
to this portable MD.
3
Press the REC LEVEL or button to adjust
the recording level (see page 11).
4
Press the PAUSE button on the stereo system to
enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
5
Press the MENU/CHRG button repeatedly to se-
lect "REC MODE".
6
Press the ENTER/SYNC button.
7
Select the recording mode (step 3, page 18) and
press the ENTER/SYNC button.
The mode will be set automatically after 7 seconds
even if the ENTER/SYNC button is not pressed.
8
Press the ENTER/SYNC button again.

"SYNC" will flash.

To cancel the operation, press the :OFF/HOLD
button.
9
Begin playback on the stereo system.
Recording will begin automatically.