Sun Microsystems 3U - Manual (Page 27)

5
C H A P T E R
2
Installing the SunATM Software
This chapter describes how to install SunATM software from the Solaris Sun
Computer Systems Supplement CD. You must install the SunATM software before
installing the adapter into your system.
This chapter contains the following sections:
■ “Checking the System for SunATM Software” on page 5
■ “Installing the SunATM Software” on page 6
■ “Configuring the SunATM Interfaces” on page 9
Checking the System for SunATM
Software
Before installing the new SunATM software, check to see if it is already installed on
the system.
▼ To Check for Previously Installed SunATM
Software Packages
● Using the pkginfo command, check your system for the SunATM software
packages.
# /usr/bin/pkginfo | grep SUNWatm
system SUNWatm SunATM Device Drivers
application SUNWatma SunATM Interim Api Support Software
application SUNWatmu SunATM Runtime Support Software