Sun Microsystems Sun Quad - Manual (Page 52)

38 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997
In the third line in the previous example:
■ Name = SUNW,qfe
■ Parent = /pci@1f,2000/pci@2
■ Unit-address = 2,1
In the fourth line in the previous example:
■ Name = SUNW,qfe
■ Parent = /pci@1f,2000/pci@2
■ Unit-address = 3,1
2. Set the ipg1 and ipg2 parameters for the above four devices in the
/kernel/drv/qfe.conf file.
3. Save the qfe.conf file.
4. Save and close all files and programs, and exit the windowing system.
5. Halt and reboot the system by typing the init 6 command at the superuser
prompt.
name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “0,1” ipg1=20 ipg2=10;
name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “1,1” ipg1=20 ipg2=10;
name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “2,1” ipg1=20 ipg2=10;
name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “3,1” ipg1=20 ipg2=10;