Sony RM-AV3100 - Manual (Page 96)

96
Table of Preset Functions
(continued)
KEY DISPLAY
POWER
1 – 9, 0, ENTER
INPUT
DISPLAY
S.INDEX
INFO
FAVORITE
GUIDE
ANT/SW
m* 1
N* 1
M* 1
REC* 1 * 2
x* 1
X* 1
MENU
OK
STB (Digital Satellite)
FUNCTION
To turn the power on/off
To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
To switch the output of the
SAT receiver to the TV (When
connecting a TV cable or
antenna to the receiver, the
output switches between a
TV and SAT program)
To turn on the display
To bring up the Station Index
To display program
information
To use the “FAVORITE”
function
To bring up Master Guide
To switch the antenna input
in order
To rewind
To play
To fast-forward
To record
To stop
To pause
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To bring up the Station Index
when a program guide is not
displayed
To select the channel that is
highlighted
KEY DISPLAY
EXIT
CHANNEL +/–
RECALL
OUTPUT
REPLAY
CATEGORY
DOT
FUNCTION
To exit the setting menu
Channel up: +
Channel down: –
To select the channel
previously selected
Cyclic HDTV output
resolution
To replay the built-in DVR
Category guide
Decimal point for channel
number
* 1 The operation of the built-in DVR or the
video on demand
* 2 To avoid accidental recording, the REC key
does not work unless pressed for more than
1 second (factory setting). To change this
setting, see ”Adjusting the beam interval to
avoid key misoperation” on page 86.