Sanyo DS19500 User Manual
Page 6
6
➀
Game (Input) Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A/V jacks.
➁
Menu Key
Use this key with the keys
/
and
/
keys to navigate and adjust
features of the on-screen menu system
(see pages 7~8).
➂
Channel (CH
/
) and
Volume (VOL
/
) Keys
Press to scan through the channels in
memory and to adjust the volume.
➃
Mute Key
Press once to minimize the volume.
Press again to restore.
Note: When using the audio out jacks,
this key will not mute the sound.
➄
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels 100
through 125, press and hold the 1 key
until C1– – appears. Then press the
other two numbers.
➅
Caption Key (See page 11.)
➆
V-Guide Key (See pages 12 and 13.)
➇
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all
customized settings (see page 14).
➈
Power Key
Press to turn TV on or off.
➉
Recall Key
Select a channel then select another
channel using the number keys. Press
RECALL to switch between the
channels.
Display Key
Press once to display the Channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 14).
REMOTE CONTROL KEYS
GAME
(INPUT)
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESET
CH
POWER
VOL
VOL
1
2
3
4
5
6
7
8
9
0
4
5
6
7
8
9
0
1
2
3
➀
➁
➂
➃
➄
➈
➉
➆
➅
➇
➠
Point towards TV
11
12
12
11
QuickTips
■
Point the remote
control toward the TV.
Objects between the
remote control and the
TV may cause mis-
operation of remote
control function.
■
Front panel keys
work like remote
control keys.
■
Be sure batteries are
installed correctly.
■
This remote control
has glow-in-the-dark
Power, Channel, and
Volume keys.
■
Cannot select channel
with number keys.
Press “0” in front of
numbers 1 ~ 9.
Example:
Channel
05.
■
The “C” in front of
the number on your
screen indicates a
cable channel.
■
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing
arrow indicates
volume is decreasing.
■
Channel number
will not display
continuously when
captioning is on.
■
Using V-Guide
TV Parental Guide-
lines settings can be
changed only by
using the Remote
Control. (See pages
12 and 13.)
Need help?
Visit our website at
www.sanyoctv.com
or Call 1-800-877-5032