Woodstock W1811 - Manual (Page 54)

-52-
N(/((('Jc`[`e^KXYc\JXn
D
8
@EK<
E8E:
<
D8@EK<E8E:<
Tables can be kept rust-free with regular applications of products like SLIPIT ® . For long term storage
you may want to consider products like Boeshield T-9™.
KXYc\ 9Xj\
Frequently blow off sawdust with compressed air. This is especially important for the internal working
parts and motor. Dust build-up around the motor is a sure way to decrease its lifespan.
Occasionally it will become necessary to clean the internal parts with more than compressed air. To do
this, remove the table top and clean the internal parts with a citrus cleaner or mineral spirits and a stiff
brush (a toothbrush works well in tight spaces). Make sure the internal workings are dry before using the
saw again so that wood dust will not accumulate. If any essential lubrication is removed during cleaning,
relubricate those areas.
:c\Xe`e^
For optimum performance from your machine, follow this
maintenance schedule and refer to any specific instructions
given in this section.
;X`cp:_\Zb1
• Loose
mounting bolts.
• Worn or damaged saw blades.
• Worn or damaged switches or wires.
• Any other unsafe condition.
N\\bcpDX`ek\eXeZ\1
•
Clean sliding table surface and grooves.
• Clean the cast iron saw table.
• Clean the sliding table roller guideways.
• Clean the rip fence and sliding grooves.
• Clean the rip fence bracket.
Dfek_cp:_\Zb1
•
Clean/vacuum dust buildup from inside cabinet and
off motor.
• V-belt tension, damage, or wear.
Efk\1Kf\ejli\fgk`dldgfn\ikiXejd`jj`fe]ifdk_\
dfkfikfk_\YcX[\j#k_\Y\ckjdljkY\`e^ff[Zfe[`k`fe
]i\\]ifdZiXZbj#]iXp`e^Xe[n\Xi Xe[fg\iXk\le[\i
gifg\ik\ej`fe%
JZ_\[lc\
D8B< JLI< k_Xk pfli dXZ_`e\ `j
legcl^^\[ [li`e^ Xcc dX`ek\eXeZ\ gif$
Z\[li\j@]k_`jnXie`e^`j`^efi\[#j\i`$
fljg\ijfeXc`ealipdXpfZZli%