Sony SCPH-55006 GT - Manual (Page 5)

5
GB
Part names
PlayStation ® 2 console
Front
MEMORY CARD slots
“ ” product family logo
1 (standby)/RESET button and
1 indicator
A (open) button and
A indicator
Disc tray
Controller ports
L2 button, R2 button,
L1 button, R1 button
Directional buttons
¢ button, a button,
✕ button, s button
START button
ANALOG mode button
SELECT button
Left analog stick,
right analog stick,
L3 button, R3 button
AV MULTI OUT connector
DIGITAL OUT (OPTICAL)
connector
MAIN POWER switch
~ AC IN connector
Rear
IR receiver
EXPANSION BAY
You can position the console either horizontally
or vertically.
When positioning the console vertically, use the
SCPH-10040 G vertical stand (for PlayStation
® 2)
(sold separately). If a vertical stand (for
PlayStation
® 2) is not available, set the console
in the horizontal position as shown below.
When positioning the console horizontally, you
can use the SCPH-10110 G horizontal stand (for
PlayStation
® 2) (sold separately).
Notes
• Do not place the console in any position other than the
horizontal or vertical positions as doing so may damage it.
• Do not change the position of the console while it is in
operation. Doing so may damage the disc or cause the
console to malfunction.
Vertical position Horizontal position
The ” ” product family logo on the disc
tray
The “ ” product family logo on the disc tray
can be rotated to match the horizontal or
vertical positioning of the console.
Logo adjustment
Positioning the console
Getting started