Sennheiser SK 500 G2 - Manual (Page 20)

52
Adjustment tips for the
operating menu
Switching between channel banks – BANK
Via the “ BANK ” menu, you can switch between the
transmitter’s nine channel banks. Each of the channel
banks “1” to “8” has up to 20 switchable channels that are
factory-preset to a transmission frequency (see “The
channel bank system” on page 36). The channel bank “U”
(user bank) has up to 20 switchable channels to store your
selection out of 1440 transmission frequencies that are
freely selectable within the preset frequency range.
When switching from one channel bank to another, the
channel with the lowest channel number is automatically
displayed.
Switching between the channels – CHAN
Via the “ CHAN ” menu, you can switch between the different
channels in a channel bank. When switching between the
channels, please observe the following:
Always set the transmitter and the receiver of a
transmission link to the same channel.
Multi-channel operation
Combined with ew 500 G2 receivers, the transmitter can
form transmission links that can be used in multi-channel
systems. For multi-channel operation, only use the free
channels in a channel bank.
Before putting the transmission links into operation, we
recommend performing an auto scan (see operating
manual of the receiver).
Selecting the frequencies to be stored
in the channel bank “U” –
TUNE
Via the “ TUNE ” menu, you can select the frequencies to be
stored in the channel bank “U” (user bank).
When you have selected one of the channel banks “1” to “8”
and then select the “
TUNE ” menu, the transmitter auto-
matically switches to channel 01 of the channel bank “U”.
In this case, “U.01” briefly appears on the display.
ew500_SK.book Seite 52 Dienstag, 4. November 2003 4:02 16