Sennheiser SK 500 G2 - Manual (Page 8)

40
Indications and displays
LC display panel
ቢ
Alphanumeric display
ባ
“B.CH“ – appears when the channel bank and
the channel number are displayed
ቤ
“MHz“ – appears when the frequency is displayed
ብ
4-step battery status display
ቦ
Lock mode icon
(lock mode is activated)
ቧ
“PILOT” display
(pilot tone transmission is activated)
ቨ
“MUTE” display
(audio input is muted)
ቩ
7-step level display for audio signal “AF”
Operation and battery status indication
The red LED (LOW BAT/ON)
ᕣ
provides information on the
current operating state of the transmitter:
Red LED lit up: The transmitter is switched on and
the capacity of the batteries/
BA 2015 accupack is sufficient.
Red LED flashing: The batteries are/the BA 2015
accupack is going flat (LOW BAT)!
In addition, the 4-step battery status display
ብ
on the
display panel provides information on the remaining
battery/BA 2015 accupack capacity:
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing: LOW BAT
ቢ
ብ ቦ ቧ ቨ ቩ
ባ ቤ
ብ
»
ew500_SK.book Seite 40 Dienstag, 4. November 2003 4:02 16