Power control, Digital setup, Audio setup – Sharp Aquos LC 45D40U User Manual

Page 27

Advertising
background image

26

Disable

Enable

PCM

Dolby Digital

Press

MENU to exit.

5

Power Control

Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut

down if there is no signal for 15 minutes.

Audio Setup

You can output digital audio to an AV amplifier or

similar device whose DIGITAL AUDIO INPUT terminal

is connected to the DIGITAL AUDIO OUTPUT terminal

on the TV. Please select an audio output format

compatible with the audio format of the program you

are watching and the equipment connected.

NOTE

• “Disable” is the factory preset value.

• When a TV program finishes, this function may not operate.

NOTE

• “Disable” is the factory preset value.

Press a/b to select “PCM” or “Dolby

Digital”, and then press

ENTER.

Press

MENU and the MENU screen displays.

Press c/d to select “Power Control”.

Press a/b to select “No Signal Off”, and

then press

ENTER.

Press c/d to select “Enable”, and then

press

ENTER.

• Five minutes before the power shuts down, the

remaining time displays every minute.

No operation off
When set to “Enable”, the power will automatically shut

down if there is no operation for 3 hours.

Repeat steps 1 and 2 in

No signal off.

Press a/b to select “No Operation Off”, and

then press

ENTER.

Press c/d to select “Enable”, and then

press

ENTER.

• Five minutes before the power shuts down, the

remaining time displays every minute.

Digital Setup

This setting allows you to optimize the settings of

Digital broadcasting.

Press

MENU and the MENU screen displays.

Press c/d to select “Digital Setup”.

Press a/b to select “Audio Setup”, and then

press

ENTER.

Basic adjustment settings

1

2

4

3

1

2

3

1

2

4

3

Selected item

PCM

Dolby Digital

Description

The optical output terminal outputs

audio signal in PCM form. If your

digital audio system does not support

Dolby Digital, select “PCM”.

The optical output terminal outputs

audio signal in Dolby Digital form.

It reproduces sound from surround

program of digital.

Press

MENU to exit.

4

Press

MENU to exit.

5

D40U_en_d.indd 26

2006/01/23 11:24:42

Advertising