Sharp Aquos LC 45D40U - Manual (Page 30)

29
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Connecting HDMI equipment
You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment.
HDMI cable (Commercially
available)
Press a/b/c/d to select the desired
setting and press ENTER.
NOTE
• Refer to your external equipment operation manual for the
signal type.
Using external equipment
When using an HDMI-DVI
conversion cable, input the
audio signal to AUDIO terminal
of INPUT 4.
HDMI equipment
Displaying an image from HDMI
equipment
To watch an HDMI equipment image,
select “INPUT4” or “INPUT5” from “INPUT
SOURCE” menu using INPUT on the remote
control unit or on the TV. (See page 31.)
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “HDMI Setup”, and then
press ENTER.
Press a/b to select the desired item and
press ENTER.
1
2
3
4
5
6
HDMI
Setup
items
Selectable
items
Description
Signal
Type
Auto View
Audio
Select
RGB/YCbCr 4:4:4/
YCbCr 4:2:2
Enable/Disable
Digital/Analog
Select the video signal type from
the HDMI terminal.
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select “Digital” for an audio
signal via the HDMI terminal.
Select “Analog” for an audio
signal via the R-AUDIO -L
terminal.
MENU [Option ... HDMI Setup]
Option
Digital Noise Reduction
Output Select
Audio Only
Quick Shoot
[Fixed]
HDMI Setup
[Low]
[Off]
Press MENU to exit.
7
D40U_en_f.indd 29 2006/01/23 11:31:45