Sirius Satellite Radio Satellite Radio Sportster 5 - Manual (Page 25)

[
Installation
] 2
Sedan/Coupe antenna Cable Routing Procedure
Figure 11 shows how the antenna cable should be routed from the antenna to your
SIRIUS radio in a sedan/coupe.
Follow these detailed cable installation instructions:
Feed the cable from the antenna underneath the rubber molding around the rear
window. Use a plastic putty knife or similar object to lift the rubber molding around
the rear window and tuck the antenna cable underneath the molding. Route the an-
tenna cable around and down the window to the lowest point. If your rear window
does not have rubber molding, SIRIUS recommends consulting with a professional
installer. 1.
1. Feed Cable Under
Rubber Molding
Around Window
4. Route Cable from Trunk Under
Interior Trim, into Cabin and
Towards Front of Vehicle
6. Bring Cable Out To
SIRIUS Receiver
Location
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
2. Route Cable Out of
Window Molding and
Into Weatherstripping
Around Trunk Opening
3. Route Cable
Along Trunk Wall
and Into Cabin
A
NTENNA
figure 11