Sony RM-AV2100B - Manual (Page 9)

9
Example: To set up a Philips’ TV
1
See the tables in the supplied
“Component Code Numbers”,
and find the three-digit code
number for the desired
component.
If more than one code number is
listed, use the number that is listed
first.
For example, to set up a Philips’ TV,
you would use the code number 056.
2
While pressing COMMANDER
OFF, press MUTING.
All the component names in the
display flash.
3
Press the Component Select
button for the desired component.
The selected component remains
displayed, and the 0 – 9, ENTER and
DISPLAY keys flash.
Note on the DVD and CBL/SAT
buttons
When you set the component code of the DVD
or CBL/SAT button, press repeatedly until the
desired component is displayed (“DVD” or
“VD”, “CBL” or “SAT”).
Note on the DECK B/A button
You have to set one component code each for
DECK A and DECK B. Press the DECK B/A
button repeatedly until the desired deck is
displayed (“DECK A” or “DECK B”), and set a
component code for it.
4
Press the three-digit component
code number followed by the
ENTER key on the touch-key
display.
A beep sounds, and the code number
and “ENTER” appear twice.
5
If you want to set a code for
another component, repeat Steps
3 and 4.
6
Press COMMANDER OFF.
Continued