Sony RM-AV2100B - Manual (Page 28)

28
Programming a series of
commands to the Component
Select buttons
As with the SYSTEM CONTROL buttons,
you can also program a series of
operating commands for the Component
Select buttons (up to 16 steps).
To execute the commands programmed
on a Component Select button by the
System Control function, press the button
for more than 2 seconds.
Notes
• The programmed commands are executed
when you press a Component Select button
for more than 2 seconds. When you press the
button for less than 2 seconds, it works as
the normal Component Select button, and the
corresponding touch-keys are displayed.
• See also “Tips for programming the System
Control functions” on page 25 and “Notes on
System Control Operations” on page 27.
Example: To program the
procedure on page 23 for the
VCR3 button
1
While pressing COMMANDER
OFF, press VOLUME+ and VCR3.
All the component names flash.
If a series of commands is already
programmed for that button
The programmed operations are displayed
in order. To program a new series of
operations, clear the program first (page
29).
2
Follow Steps 2 to 5 on pages 24
and 25.
Executing a Series of Commands
— System Control Functions
(continued)