Sony RM-AV2100B - Manual (Page 61)

61
KEY DISPLAY
POWER
1 – 9, 0, ENTER
+10
INPUT
DISPLAY
RECALL
FAVORITE
S.INDEX
GUIDE
EXIT
MENU
M
m
,
<
EXECUTE
CHANNEL +/–
SAT
FUNCTION
To turn the power on/off
To change the channel
For example, to change to
channel 5, press 0 and 5 ( or,
press 5 and ENTER).
To select numbers 10 and
above
To switch the output of the
SAT receiver to the TV (When
you connect a TV cable or
anntenna to the receiver, the
output switches between a
TV and SAT program)
To turn on the display
To tune to the last tuned
station
To use the “FAVORITE”
function
To bring up the Station Index
To bring up Master Guide
To exit the mode
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To bring up the Station Index
when a program guide is not
displayed
To select the channel that is
highlighted
Channel up : +
Channel down : –
Continued
KEY DISPLAY
POWER
1 - 9, 0
ENTER
VIDEO 1
VIDEO 2
VIDEO 3
AUX/VDP
DVD
TV
CD
MD/DAT
TUNER
TAPE
PHONO
MENU
M
<
,
m
EXECUTE
AMP
FUNCTION
To turn the power on/off
To use the key directly
To enter the setting
To select the input source:
VIDEO 1
To select the input source:
VIDEO 2
To select the input source:
VIDEO 3
To select the input source:
VDP (LD)
To select the input source: DVD
To select the input source: TV
To select the input source: CD
To select the input source: MD
To select the input source:
TUNER
To select the input source:
TAPE
To select the input source:
PHONO
To call up the MENU display
To move the cursor upward
To move the cursor to the left
To move the cursor to the right
To move the cursor downward
To enter the selection of the
MENU display