Sony LBT-XG60 - Manual (Page 7)

Getting Started
7 GB
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
4 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
When carrying this system
Do the following to protect the CD mechanism.
1 Make sure that all discs are removed from
the unit.
2 Press FUNCTION repeatedly until “CD”
appears.
3
Hold down LOOP and then press ? / 1 until
“LOCK” appears.
4
Unplug the AC power cord.
Before connecting the Front speaker
Stick the supplied front speaker pads to the
bottom of the front speakers to stabilize the
speakers and prevent them from slipping.
VOLTAGE SELECTOR
120V
220V
230~240V
Inserting two size AA (R6)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.