Sonic Blue DVR4400 - Manual (Page 44)

38
DVR4400 DVD+VCR
:: Copying DVD to VHS
To copy a DVD to VHS tape
1 Insert the disc you wish to copy in the DVD deck and close the drawer.
2 Insert a VHS tape with a record safety tab into the VCR deck.
3 Press COPY on the DVD+VCR front panel.
•
The DVD will begin playback and the VCR will begin recording.
• If the DVD disc menu appears, press PLAY/PAUSE
"
/|| to begin copying.
4 When the DVD is finished playing, press VCR on the remote control and then press STOP
J
to end the copy.
• You must stop the copy process manually when the DVD movie ends, or the DVD may replay and record over and over
again.
• If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy
Macrovision® encoded DVDs.