Sony ICF-DVD57TV - Manual (Page 8)

8
Installing the Unit Under a
Cabinet
The unit can be installed without the spacer.
1
Mark the position of the 4 holes by using
the supplied template. Use a drill to
make the holes (diameter size-6.5 mm
dia.,
9 /
32
inch).
2
When the cabinet door overhangs the
shelf and obstructs the unit, you can
adjust the unit/shelf height.
First set the L mark to the dot which
becomes the lowest position, then you can
adjust the height in 4 steps (H••L) by
turning the spacer counterclockwise.
Template
L (Low)
Dot
Before Installation
The unit should be installed in an area with
good reception.
Improving the Reception
FM: The AC power cord functions as an FM
antenna.
Extend the AC power cord fully to
improve FM reception.
AM: When installing the unit, rotate the unit
horizontally for optimum reception and
then install the unit. A ferrite bar antenna
is built into the unit.
Spacer