Sony 4-130-433-13(2) - Manual (Page 49)

49 GB
Ad
ditional Inf
o
rmation
MHC-GTZ2 / GTZ2i
Brazilian model only
The following are measured at AC 127 or
220 V 60 Hz
RMS output power (reference):
130 W + 130 W (per channel at 6
Ω,
1 kHz, 10% THD)
Other models
The following are measured at
Mexican model:
AC 127 V, 60 Hz
European model:
AC 230 V, 50 Hz
Other models:
AC 120, 220, 240 V, 50/60 Hz
Front speaker
Power output (rated): 60 W + 60 W
(at 6
Ω, 1 kHz, 1% THD)
RMS output power (reference):
100 W + 100 W (per channel at 6
Ω,
1 kHz, 10% THD)
LBT-GTZ4i
The following are measured at AC 120 V
60 Hz
Front speaker
RMS output power (reference):
185 W + 185 W (per channel at 6
Ω,
1 kHz, 10% THD)
Subwoofer
RMS output power (reference): 180 W
(at 6
Ω, 100 Hz, 10% THD)
Inputs
PC (AUDIO IN) L/R:
Voltage 700 mV
impedance 47 kilohms
MIC: sensitivity 1 mV, impedance
10 kilohms
(USB) port: Type A
Outputs
PHONES: accepts headphones of 8
Ω or
more
FRONT SPEAKER: accepts impedance
of 6
Ω
SUBWOOFER (MHC-GTZ5, MHC-GTZ4 /
GTZ4i, MHC-GTZ3 / GTZ3i and
LBT-GTZ4i only): accepts impedance
of 6
Ω
USB section
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 – 320 kbps, VBR
WMA: 48 – 192 kbps
AAC: 48 – 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Transfer speed
Full-Speed
Supported USB device
Mass Storage Class
Maximum current
500 mA
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6
µW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Continued
l