Samsung SCD103/215 - Manual (Page 32)

Basic Recording
28 28
ENGLISH
Making your First Recording
1. Connect a Power source to the camcorder. (see page 23)
(A battery pack or a AC power adapter)
■ Insert a cassette. (see page 27)
2. Remove the LENS CAP.
3. Set the power switch to the CAMERA position.
■ Open the LCD monitor.
■ Set the mode switch to the TAPE position.
Make sure that STBY is displayed.
■ If the protection tab of the cassette is open, STOP and
PROTECTION! will be displayed.
■ Make sure the image you want to record appears on the
LCD monitor or viewfinder.
■ Make sure the battery level indicates that there is enough
remaining power for your expected recording time.
4. To start recording, press the START/STOP button.
■ REC is displayed on the LCD.
To stop recording, press the START/STOP button again.
■ STBY is displayed on the LCD.
4
1
3
2
00743R SCD103 SEA (28~59) 1/10/04 8:55 AM Page 28