Samsung SCD103/215 - Manual (Page 56)

52 52
ENGLISH
Advanced Recording
● WIND CUT
✤ The WIND CUT function works in CAMERA and PLAYER modes.
✤ The WIND CUT function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight A/V and press the ENTER button.
4. Select WIND CUT from submenu.
5. This feature toggles ON/OFF each time you press the ENTER button.
■ is shown in the display when you turn the WIND CUT on.
6. To exit, press the MENU button.
Notes
■ Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible.
■ Use the WIND CUT when recording in windy places such as the beach or near buildings.
CAM MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
12
SOUND[1] AUDIO SELECT
WIND CUT
A / V SET
PB DSE
CAM MODE
INITIAL
WIND CUT
PB DSE
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
CAMERA
A/V
MEMORY
VIEWER
00743R SCD103 SEA (28~59) 1/10/04 8:55 AM Page 52