Samsung ATT_SGH_I727_CELOX_UM_KJ1_WC_102711_F7 User Manual

Page 177

Advertising
background image

Health and Safety Information 172

SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.

For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the mobile device a
minimum of 1.0 cm from the body.

Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values

for this model phone as reported in the FCC equipment
authorization grant are:

WCDMA/GSM/EDGE and 700 MHz/AWS LTE

The highest reported SAR values are:

Head: 0.30 W/kg

Body-worn accessory: 0.55 W/kg

Product Specific: 0.85 W/kg

Simultaneous Transmission: 0.87 W/kg

WLAN

The highest reported SAR values are:

Head: 0.13 W/kg

Body-worn accessory: < 0.10 W/kg

Product Specific: < 0.10 W/kg

Simultaneous Transmission: 0.87 W/kg

SAR information on this and other model phones can be viewed
online at

http://www.fcc.gov/oet/ea

. To find information that

pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.

Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular

Advertising
This manual is related to the following products: