Options during a call – Samsung ATT_SGH_I727_CELOX_UM_KJ1_WC_102711_F7 User Manual
Page 51
Call Functions 46
4.
Tap Call duration.
5.
The following times are displayed for Voice:
• Last call: shows the length of time for the last call.
• Dialed calls: shows the total length of time for all calls made.
• Received calls: shows the total length of time for all calls received.
• All calls: shows the total length of time for all calls made and
received.
6.
You may reset these times to zero by pressing
then tapping
Reset.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume keys
on the left side of the phone.
ᮣ
Press the Up volume key to increase the volume level and
press the Down volume key to decrease the volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold: place the current active call on hold.
•
Add call: displays the dialer so you can call another person.
•
Keypad: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
•
End call: terminates the call.
•
Speaker: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap Speaker to route the audio through the speaker. (You can adjust
the speaker volume using the volume keys.) A green line will appear
under the Speaker button.
–
Tap Speaker again to use the phone’s earpiece (see “Using the
Speakerphone During an Active Call” on page 48.) The green line
will turn grey when Speaker is not activated.
•
Mute: turn the onboard microphone either on or off.
–
Tap Mute during a call to mute the microphone. A green line will
appear under the Mute button.
–
Tap Mute again to unmute the microphone. The green line will turn
grey when Mute is not activated.
•
Headset: connects to a Bluetooth headset.
–
Tap Headset during a call to activate a Bluetooth headset. A green line
will appear under the Headset button.