Sony DAV-DZ250M - Manual (Page 74)

masterpage:Left
specdef v20061206
filename[E:\SS2007\Models\DS2KD\2895968E11\2895968E11DAVDZ250M\gb11adv.fm]
model name [DAV-DZ250M]
[2-895-968-E1(1)]
74 GB
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, DYNAMIC BASS,
MOVIE/MUSIC, and sound field are not applied to
the sound that is output from the TV.
x [DivX]
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 69).
The default settings are underlined.
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not
return to the default setting.
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.
Note
• When you change the [CONNECTION] setting, the
[SPEAKER FORMATION] setting returns to
[STANDARD].
[ON] Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.
Settings for the Speakers
[SPEAKER SETUP]
[FRONT] [YES]
[CENTER] [YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND] [YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER] [YES]
SPEAKER SETUP
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
OFF TEST TONE:
CONNECTION:
FRONT:
CENTER:
YES
YES
YES
YES
SURROUND:
SUBWOOFER: