Scag Power Equipment STC48V-24BS - Manual (Page 32)

28
Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.
MAINTENANCE
HOURS
Break-In 8 20 40 100 200 500 Procedure Comments
(First 10)
X Check all hardware for tightness
X Check hydraulic oil level See paragraph 7.3
X Check all belts for proper alignment See paragraph 7.8
X Check hydraulic hoses for leaks Use extreme caution when
checking the hydraulic hoses
See paragraph 26
X Check seat belts for damage See paragraph 2.5
X Check engine oil level See paragraph 7.4
X *Clean mower See paragraph 7.11
X Check condition of blades See paragraph 7.9
X Apply grease to fittings See paragraph 7.2
X Check tire pressure See paragraph 7.10
X Change engine oil and filter See paragraph 7.4
X Check battery electrolyte level, See paragraph 7.7
clean battery posts and cables
X Check belts for proper alignment See paragraph 7.8
X Apply grease to fittings See paragraph 7.2
X Change engine oil See paragraph 7.4
X *Clean air cleaner element See paragraph 7.6