Sony DHC-FL5D - Manual (Page 55)

55 GB
Other Features
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function and not playing a disc.
• When high level sound signals are input, the unit
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control Function).
About indicators
MULTI CHANNEL DECODING indicator:
Lights up except when the 2 channel source is
being played back in DVD or DIGITAL
function.
PRO LOGIC indicator (in the display) :
Lights up when the unit applies Dolby Pro
Logic processing to 2 channel signals in order
to output the center and rear channel signals.
; DIGITAL indicator (in the display) :
Lights up when the unit is decoding signals
recorded in the Dolby Digital format.
dts indicator (in the display) : Light up when
DTS signals are input.
Falling asleep to music
— Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep to music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes as follows:
AUTO* t 90 t 80 t 70 t … t
10 t OFF
* The power turns off when the current disc or tape
finishes playback (for up to 100 minutes).
To
Check the remaining
time**
Change the time to
turn off
Cancel the Sleep
Timer
** You cannot check the remaining time if you select
“AUTO”.
Press
SLEEP on the remote once.
SLEEP on the remote
repeatedly to select the time
you want.
SLEEP on the remote
repeatedly until “SLEEP
OFF” appears.