Specifying trap managers, Specifying trap managers -96 – SMC Networks TigerSwitch 100 User Manual
Page 126
C
ONFIGURING
THE
S
WITCH
2-96
CLI – The following example adds the string “spiderman” with read/write
access.
Specifying Trap Managers
You can specify up to five management stations that will receive
authentication failure messages and other trap messages from the switch.
Command Usage
•
If you do not enter a trap manager host IP address, no notifications are
sent. In order to configure the switch to send SNMP notifications, you
must enter at least one host IP address.
•
The switch can send SNMP version 1 or version 2c traps to a host IP
address, depending on the SNMP version that the management station
supports. The default is to send SNMP version 1 traps.
•
You can enable or disable authentication messages and link-up-down
messages via the Web interface.
•
You can enable or disable authentication messages, link-up-down
messages, or all notification types via the CLI.
Console(config)#snmp-server community spiderman rw
Console(config)#