Saving or restoring configuration settings, Saving or restoring configuration settings -24 – SMC Networks TigerSwitch 100 User Manual
Page 54
C
ONFIGURING
THE
S
WITCH
2-24
To start the new firmware, reboot the system.
CLI – Enter the IP address of the TFTP server, select config or opcode
file type, then enter the source and destination file names, set the new file
to start up the system, and then restart the switch.
Saving or Restoring Configuration Settings
You can upload/download configuration settings to/from a TFTP server.
The configuration file can be later downloaded to restore the switch’s
settings.
Command Attributes
•
TFTP Server IP Address – The IP address of a TFTP server.
•
Destination File Name — File names are case-sensitive. The file
name should not contain slashes (\ or /), the leading letter of the file
name should not be a period (.), and the maximum length for file
Console#copy tftp file
TFTP server ip address: 10.1.0.99
Choose file type:
1. config:
2. opcode: <1-2>: 2
Source file name: v10.bix
Destination file name: V10000
/
Console#config
Console(config)#boot system opcode: V10000
Console(config)#exit
Console#reload