Sony KV-27FS120 - Manual (Page 26)

18
Connections
Connecting a TV, VCR, and Satellite Receiver using
Component Video (Y, P
B
, P
R
)
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your VCR
to AUDIO/VIDEO IN on your TV.
6 Using component video cables (not supplied), connect the Y, P
B
, P
R
OUT on your satellite
receiver to Y, P
B
, P
R
IN on your TV.
7
Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏ Turn on your VCR to enable your satellite receiver to work with this connection.
❏ To activate your remote, press (FUNCTION button) to operate your VCR or
(FUNCTION button) to operate your satellite receiver.
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
L
R
L
R
Y
B
P
P
R
VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 2 VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
1 3 4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO Y
P B
P R
L
R
From
VCR
4
2
Rear of TV
3
5
7
6
1
Satellite
Receiver
Audio R
Audio R (red)
Audio L (white)
Video (yellow)
Audio L
P
R
(red)
P B (blue)
Y (green)
cable/antenna
(white)
(Red)