Sony HT-DDW890 - Manual (Page 35)

35 GB
P
lay
b
a
ck
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
“T. TONE”.
5
Press or b to enter the
parameter.
6
Press V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left
t Center t Front right t
Surround right t Surround back t
Surround left t Sub woofer
7
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 42).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
8
Repeat steps 1 to 6 to select
“T. TONE N”.
You can also press any input buttons.
The test tone turns off.
Selecting a component
1
Press the input button to select
a component.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.
Playback
SYSTEM STANDBY
TUNING –
DISC SKIP
MUTING
TV VOL
MASTER VOL
TV CH
PRESET
TUNING +
GUIDE DISPLAY
RETURN/
EXIT
OPTIONS
TOOLS
REPLAY ADVANCE
VIDEO 1 VIDEO 2 VIDEO 3 DVD
SAT TV TUNER
2CH A.F.D. MOVIE MUSIC
SLEEP FM MODE D. TUNING
SA-CD/CD
AUX DMPORT RECEIVER
MEMORY
. >
m M
x X
MENU
H
CLEAR
>10
– /– –
< <
DVD
2 3
4 5 6
7 8 9
ENTER 0/10
1
AUTO CAL
B
V
v
B
1
3
MUTING
continued