Sun Microsystems Netra CP32x0 - Manual (Page 4)

iv Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009
2.3 Removing the ARTM-HD 2–9
2.4 Installing a Hard Disk Drive 2–11
2.5 Removing a Hard Disk Drive 2–11
2.6 Changing the OOS LED Color 2–12
3. Disk Management 3–1
3.1 RAID Support 3–2
3.2 SAS BIOS Overview 3–2
3.3 Starting the SAS BIOS Configuration Utility 3–3
3.4 Creating a RAID 0 Volume 3–4
3.5 Creating a RAID 1 Volume 3–5
3.6 Creating a RAID 1E Volume 3–6
3.7 Viewing RAID Volume Properties 3–7
3.8 Synchronizing an Array 3–8
3.9 Activating an Array 3–8
3.10 Deleting an Array 3–9
3.11 Locating a Disk Drive 3–9
4. Specifications and Connectors 4–1
4.1 Specifications for the ARTM-HD 4–2
4.1.1 Physical Dimensions 4–2
4.1.2 Power Requirements 4–2
4.1.3 Electrical Requirements 4–2
4.1.4 Environmental Specifications and Compliance 4–2
4.2 Hardware Descriptions 4–3
4.2.1 Ethernet Management Port 4–3
4.2.2 Infinband-style Connectors 4–3
4.2.3 Serial Port 4–3
4.2.4 SAS Interface 4–3