Sanyo DS31820 - Manual (Page 15)

15
CONNECTING A SATELLITE SYSTEM, VCR, AND ANTENNA TO THE TV FOR PIP OPERATION
Cables are not supplied.
❶
Connect an antenna signal to the TV 75 Ω (ohm) terminal.
❷
Connect Satellite S-Video Out to TV S-Video In jack. Using the S-Video In jack overrides the Video Input jack.
Connect the Satellite Audio Out (R/L) jacks to TV Audio Input (R/L) Jack (AV1) jacks.
❸
Connect the VCR Audio/Video out jacks to the TV Audio/Video AV2 In jacks.
❹
Connect RF cable from the Satellite Receiver “Out to TV” to the VCR “In from ant.”
❺
Press POWER key to turn on the TV. Turn on external equipment.
TO USE PIP:
1. Press PIP key to display PIP window.
2. Press the SELECT key to select Video1 or Video2 for the PIP window.
3. Refer to page 14 to operate PIP, if needed.
Notes: – PIP feature will not function with just the satellite system, you must connect another signal source such
an antenna.
– This connection allows you to use your VCR to record a signal from the Satellite Receiver.
UHF/VHF/CATV
75 Ω
VIDEO AUDIO INPUT
COMPONENT AV2 AV1
S-VIDEO
VIDEO
(MONO)
AUDIO R R
L L
IN FROM
SAT.
CATV IN
OUT TO TV S-VIDEO
CH3
CH4 A/V JACKS
OUT
-R L- AUDIO VIDEO
FROM ANT.
OUT TO TV -R L-AUDIO VIDEO
A/V JACKS
CH3 CH4
RF
CHANNEL
IN
OUT
IN
OUT
-R L-AUDIO VIDEO
❷
❶
Satellite Receiver
Back
TV Back
Antenna
PIP Satellite Hookup
❷
❸
VCR Back
❹ What you will need for connections:
❷
Audio Cable – 1
❷
S-Video Cable – 1
❸
AV Cable – 1
❹
RF Cable – 1
DS31820_3763-- 8/17/05 12:59 PM Page 15