Sharp SD-CX1H - Manual (Page 39)

39
CX1H_UK35-41.fm 00/12/17
MD Reco
rd
ing
R
ecor
d
in
g t
o
a
MiniDi
sc
fr
o
m
a
CD


Recording on the top position of a
recorded MiniDisc
When the recording is finished, the top position mode will be cancelled.
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:

Whilst in the pause mode or recording, the top position mode cannot be set or
cancelled.


Adjusting the recording level
You can adjust the recording level depending on the recording source by watching the
level meter.
To stop recording:
Press the MD button.
The MiniDisc will stop.
The CD will continue playback.
1
Prepare for recording.
To record from a CD: To record from the radio:
Load the desired CD and a recordable
MiniDisc. Tune in to the desired station and load
a recordable MiniDisc.
2
Press the TOP POSITION button.
One more press will cancel the top position mode.
3
Start recording.
To record from a CD: To record from the radio:
Press the HIGH or NORMAL button. Press the MD button after pressing
the REC button.
1
Press the CD button.
2
Press the or button to select the desired track.
3
Press the REC MODE button to select the recording mode.
4
Press the CD button to start playback.
5
Press the REC button to pause recording.
6
Press the REC LEVEL/CURSOR or button to adjust the record-
ing level.
Level meter Recording level

Maximum level should not exceed "0dB".

The recording level can be adjusted in 2dB intervals between -4dB and +10dB.
7
Press the CD button.
8
Press the or button again to select the desired track to be
recorded.
9
Press the CD button again to start recording.
0dB -4dB ··· +10dB
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)