Silex technology SX-200 - Manual (Page 36)

User’s Guide
Document #40182-420 Rev. A 36
7. The update log will be displayed when the update process is finished. Click on Close to continue.
Loading New Firmware
(Macintosh OS-X)
1. If you are using the Macintosh OS-X operating system, download the firmware file to your desktop.
2. Go to the terminal command prompt and type cd desktop.
3. Type tftp <enter the IP address of the print server>, and then press Enter (e.g., tftp 192.168.0.4).
4. Type binary, and then press Enter.
5. At the tftp> prompt, type put <firmware file name> <password of the print server> (example: put
ppusb.bin access).
NOTE: To upgrade your print server’s firmware from operating systems other than Windows or Macintosh, refer to
the Print server Administrator’s Guide (provided in PDF format on the Print Server Installation CD).