Silex technology SX-200 - Manual (Page 51)

User’s Guide
Document #40182-420 Rev. A 51
Get Community Name
SET SNMP GETCOMM <string>
(default = “public”)
SET SNMP JETADmin
Enable or disable JetAdmin compatibility
SET SNMP JETADmin [ ENable | DIsable]
(default = enabled)
SET SNMP SETCOMM1
Set Community 1 Name
SET SNMP SETCOMM1 <string>
(default = “internal?”)
SET SNMP SETCOMM2
Set Community 2 Name
SET SNMP SETCOMM2 <string>
(default = “pass”)
SET SNMP CONtact
Set system contact string
SET SNMP CONtact <string>
(default = <null>)
SET SNMP LOCation
Set the system location string
SET SNMP LOCation <string>
(default = <null>)
SH SERIAL
Displays the serial number of the unit
sample output:
Serial number is 9047595