Smart Technologies SMARTBoard 480iv - Manual (Page 25)

Setting Use Notes
Aspect Ratio Adjusts the image output to Fill
Screen, Match Input or 16:9. Fill Screen produces an image that
fills the entire screen with stretching
and scaling.
Match Input matches the projector’s
aspect ratio to the input’s aspect ratio.
As a result, black bands could appear
along the top and bottom edges of the
screen horizontally (letterbox format) or
along the left and right edges of the
screen vertically (pillarbox format).
16:9 changes the output to 16:9 by
letterboxing the image, which is
recommended for use with HDTV and
DVD/Blu-ray™ discs enhanced for
wide-screen television.
See Video format compatibility on page
23 for descriptions of each mode.
Startup Screen Selects the type of startup screen
(SMART, Capture User Startup
Screen or Preview Startup Screen). This screen displays when the
projector lamp is starting and an image
isn’t displayed.
SMART displays the default SMART
logo on a blue background.
Capture User Startup Screen closes
the on-screen display menu and
captures the entire projected interactive
whiteboard image. The captured image
is displayed the next time that the on-
screen display opens. (The capture can
take up to one minute, depending on
the complexity of the background
graphic.)
Preview Startup Screen enables you
to preview the default or captured
startup screen.
On/Off Resets projector settings to their
default values. If you select On, all projector settings
reset to their defaults, reversing any
menu changes you made. This action
is irreversible.
Don’t adjust this setting unless you
want to reset all of the applied settings,
or unless you’re advised to by
SMART Technical Support
(
smarttech.com/contactsupport ).
C H A P T E R 3
Using your interactive whiteboard system
15