SMC Networks BARRICADE SMCWBR14-N2 - Manual (Page 67)

64
Tools_System
This section allows you to manage the router's configuration settings, reboot the router, and restore
the router to the factory default settings. Restoring the unit to the factory default settings will erase all
settings, including any rules that you've created.
Save Settings To Local Hard Drive
This option allows you to save the router's configuration to a file on your computer. Be sure to
save the configuration before performing a firmware upgrade.
Load Settings From Local Hard Drive
Use this option to restore previously saved router configuration settings.
Restore To Factory Default Settings
This option restores all configuration settings back to the settings that were in effect at the time
the router was shipped from the factory. Any settings that have not been saved will be lost. If
you want to save your router configuration settings, use the Save Settings option above.
Reboot The Device
This restarts the router. Useful for restarting when you are not near the device.