Sony STRDG800 - Manual (Page 54)

54 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm masterpage: Left
STR-DG800
2-667-346-12 (1)
x SB DEC OFF
Surround back decoding is not performed.
a)
A 6.1 channel decode flag is information recorded
in software such as DVDs.
b)
A Dolby Digital DVD that includes a Surround EX
flag. The Dolby Corporation web page can help
you distinguish Surround EX films.
c) Software encoded with a flag to denote it has both
DTS-ES Matrix and 5.1 channel signals.
d)
Software encoded with both 5.1 channel signals
and an extension stream designed for returning
those signals to 6.1 discrete channels. Discrete 6.1
channel signals are DVD specific signals not used
in movie theaters.
e)
When two surround back speakers are connected,
the output channel will be 7.1 channel.
Notes
• There may be no sound from the surround back
speaker in Dolby Digital EX mode. Some discs
have no Dolby Digital Surround EX flag even
though the packages have Dolby Digital EX logos.
In this case, select “SB DEC ON”.
• You can select the surround back decoding mode
only when A.F.D. mode is selected except for
Dolby Pro Logic IIx mode.
Settings for the tuner
(TUNER menu)
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select “4-TUNER SET” in the amplifier
menus. For details on adjusting the
parameters, see “Navigating through menus”
(page 46) and “Overview of the menus” (page
47).
TUNER menu parameters
x FM MODE (FM station receiving
mode)
• FM MODE AUTO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• FM MODE MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN (Naming preset
stations)
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page
71).
US01COV_STR-DG800-CEL.book Page 54 Tuesday, March 14, 2006 3:53 PM