Sony RDR-HXD995 User Manual

Page 33

Advertising
background image

33

H

ook

up
s and

Se
tti

n

gs

3

Turn off the recorder to receive GUIDE
Plus+ system data.

b

Note

You cannot set tuner system or “OSD Language”
to a country/region or language that is not
supported by the GUIDE Plus+ system.

If you cannot get the recorder to control
your set top box receiver

Check the connection and position of the set
top box controller (page 20).
If your set top box receiver still does not
operate with this recorder, refer to the
instructions supplied with your set top box
receiver and contact your cable or satellite
company to see if they can provide you with
a compatible set top box receiver.

b

Notes

• The list of external receivers controllable by the

GUIDE Plus+ system is updated constantly and
is distributed through GUIDE Plus+ system data
signals. Since the time your recorder has been
produced and the time you installed your
recorder for the first time, new external receiver
codes might have been added.

• If the external receiver is still not on the list or is

not controlled properly by the recorder, please
call Customer Support to report the brand and
model of your external receiver.

To fix the set top box controller to your set
top box receiver

Once you have confirmed that the set top
box controller controls your set top box
receiver, fix it in place.

1

Remove the backing on the double-
sided tape.

2

Attach it so that the set top box
controller is directly above the remote
control sensor on your set top box
receiver.

To change the basic GUIDE Plus+ settings

1

Press GUIDE.

2

Select “Setup” in the Menu Bar using

M/

,, and press ENTER.

3

Select “Basic Setup” using

M/m, and

press ENTER.

4

Repeat from step 2 of “Setting up the
GUIDE Plus+

®

system (For analogue

broadcasting/in areas with GUIDE
Plus+ only)” on
page 32.

To receive GUIDE Plus+ system
data your recorder must be turned off
when not in use. If your recorder is
connected to a set top box receiver,
be sure to leave the set top box
receiver turned on. After initial
setup, it may take up to 24 hours to
begin receiving TV programme
listings.

Advertising
This manual is related to the following products: