Sega type twin F355 - Manual (Page 20)

13 www.seuservice.com
Insert the Front Cabinet's Joint pipes into the Rear Cabinet's square holes to fit both cabinets
tight. Be sure to perform this work by 2 or more workers. Also, be careful so as not to pinch
the wiring.
FIG. 6. 1 c
JOINT BRACKET R
HEXAGON BOLT (2)
M8 X 30,w/spring washer
JOINT PLATE CENTER
TRUSS SCREW (4)
M4 X 16
JOINT BRACKET L
HEXAGON BOLT (2 each)
M8 X 30,spring washer,
flat washer used.
HEXAGON BOLT (2 each)
M8 X 20,w/spring washer,
flat washer used.
Secure the joint portion of the
Cabinets with 6 Hexagon Bolts.
Firmly secure the Joint Brackets
L&R, respectively.
By using Joint Plate Center, secure
the joint portion of the Cabinets
with 4 Truss screws and Hexagon
Bolts.
3
4
5