Sega type twin F355 - Manual (Page 43)

36 www.seuservice.com
10. 6-SPEED SHIFT
Before starting to work, ensure that the Power SW is OFF. Failure to observe
this can cause electric shock or short circuit.
Use care so as not to damage wirings. Damaged wiring can cause electric
shock or short circuit.
Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
This work should be performed by the Location's Maintenance Man or
Serviceman. Performing work by non-technical personnel can cause electric
shock hazard.
When performing work such as parts replacement other than those specified
in this manual, be sure to contact where you purchased the product from.
Confirm the work procedures and obtain precautions from where you
purchased the product from prior to performing work. Inappropriate parts
replacement and/or installation with erroneous adjustment can cause an
overload or the parts to come into contact, resulting in an electric shock, a
short circuit, and a fire.
10 - 1 REMOVING THE SHIFT LEVER
Turn off power.
Take out 4 screws securing the EFFECT Switch.
Take out 5 Truss screws which secure the Console Cover.
TRUSS SCREW (4)
M4 X 12
CONSOLE COVER
TRUSS SCREW (5)
M4 X 12,large washers used
EFFECT SWITCH
PHOTO 10. 1 a
1
2
3