Sony DAV-HDZ235 User Manual

Page 16

Advertising
background image

16

US

G

e

tting

Star

te

d –

B

A

SIC –

10

Press .

11

Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press

X/x to select [YES].

Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.

12

Press .

Auto Calibration starts.

Note

• Loud test sound is output when [AUTO

CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.

• Avoid being in the measurement area and

making noise during the measurement (which
takes about 3 minutes), as it may interfere with
measurement.

13

Unplug the calibration mic and press

C/

c to select [YES].

Note

• The environment of the room in which the

system is installed may affect measurements.

• If measurement fails, follow the message then

retry [AUTO CALIBRATION].

• When you select [SECOND ROOM] for

[SPEAKER FORMATION], measurement of
[SURROUND L] and [SURROUND R] is not
displayed.

14

Press .

Quick Setup is finished. All connections
and setup operations are complete.

To quit the Quick Setup

Press

DISPLAY in any Step.

Tip

• If you change the position of the speakers, reset the

speaker settings. See “Getting Optimal Surround
Sound for a Room” (page 62) a
nd “Calibrating the
Appropriate Settings Automatically” (page 64)
.

• If you want to change any of the settings, see “Using

the Setup Display” (page 66).

AUDIO IN / A.CAL MIC

Calibration mic

Connect calibration mic. Start
measurement?

YES

AUTO CALIBRATION

NO

FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.

YES

YES
YES
NONE
YES
NONE
NONE

Measurement complete.

NO

Advertising