Sony PDW-F30 - Manual (Page 13)

13
Using the CD-ROM Manual
Chapt
er 1 Ov
e
rv
ie
w
PDBK-102 MPEG-TS (Transport Stream)
Input/Output Board
Installation of this board enhances the functionality of the
standard i.LINK connector, allowing it to be used as an
I/O interface for HDV
1)
1080i
2)
format compatible TS
3)
signals.
HD files recorded on the disc can be converted to TS
signals compatible with the HDV1080i format for transfer
to HDV devices and HDV editors, and TS signals from
HDV devices and HDV editors can be converted to MPEG
HD compatible files for recording by this unit.
When you record to discs, you can select the appropriate
video bitrate for your application from three video bitrate
modes: 35 Mbps (HQ: high quality mode), 25 Mbps (SP:
standard mode), and 18 Mbps (LP: long-play mode). You
can select 2-channel or 4-channel mode audio, but only
channels 1 and 2 are recorded.
1) HDV and are trademarks of Sony Corporation and Victor
Company of Japan, Limited.
2) HDV1080i: Refers to devices compliant with the “HDV1080i Standard”
for recording HD signals on DV tape. There are 1080 effective lines.
3) TS: MPEG-2 transport streams containing MPEG video, MPEG audio,
and control information. This is the standard interface for HDV
equipment.
Using the CD-ROM
Manual
The supplied CD-ROM includes versions of the Operating
Instructions for this unit in English, Japanese, French,
German, Italian, Spanish, and Chinese in PDF format.
Preparations
The following program must be installed on your computer
in order to read the Operating Instructions contained on the
CD-ROM.
• Adobe Reader Version 6.0 or higher
If Adobe Reader is not installed, you can download it from
the following URL:
http://www.adobe.com/
Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
Reading the CD-ROM Manual
To read the Operating Instructions contained on the CD-
ROM, do the following.
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your browser.
If it does not appear automatically in the browser,
double-click on the index.htm file on the CD-ROM.
2
Select and click on the Operating Instructions that you
want to read.
This opens the PDF file of the Operating Instructions.
The files may not be displayed properly, depending on the
version of Acrobat Reader. In such a case, install the latest
version you can download from the URL mentioned in
“Preparations” above.
If you have lost or damaged the CD-ROM, you can
purchase a new one to replace it. Contact your Sony
service representative.
Note
Memo
Memo
Note