Sony PDW-F30 - Manual (Page 36)

36
Superimposed Text Information
Chap
te
r 2
Pr
epa
ra
tio
n
s
Displaying Supplementary Status
Information
When you set the setup menu item DISPLAY CONTROL
>SUB STATUS to other than “OFF” (see page 84), you
can view supplementary status information on the monitor
screen below the operating mode display area.
The following items of supplementary status information
are displayed depending on the setting of the menu item
SUB STATUS.
The following tables show the on-screen indications of
supplementary information and their meaning.
When the menu item SUB STATUS is set to “TC
MODE”:
When the menu item SUB STATUS is set to
“REMAIN”:
TOP 0001/xxxx Cuing up to the first
frame of the first clip.
END xxxx/xxxx Cuing up to the last
frame of the last clip.
PREROLL Cuing up during preroll
Setting of menu item
SUB STATUS Items of supplementary
information displayed
TC MODE Operating mode of the internal
timecode generator
REMAIN Amount of free capacity on the
disc (in minute units).
CLIP NO Clip number
On-screen
indication Meaning
INT PRST FREE The internal timecode generator is
operating in FREE RUN mode.
INT PRST REC The internal timecode generator is
operating in REC RUN mode.
INT REGEN-T&U The internal timecode generator is in
synchronization with the playback
timecode (LTC) read from disc.
EXT DVIN-T&U The internal timecode generator is in
synchronization with the external
timecode input to the unit via the
S400 connector and is generating the
same timecode values and user bit
values as those of the external
timecode (regeneration).
Display Operation mode
Block A Block B
T C R
P L A Y
0 0 : 0 4 4 7 . 0 7
L O C K
.
I N V A 1 3 4 2 T C S
Supplementary status information
EXT DVIN.V-T&U The internal timecode generator is in
synchronization with the external VITC
input to the unit via the S400
connector interface and is generating
the same timecode values and user bit
values as those of the external
timecode (regeneration).
On-screen
indication Meaning
REMAIN 120 min Remaining capacity of the disc in
minutes. When the remaining capacity
has not been calculated, “REMAIN ---
min” appears.
On-screen
indication Meaning