Sony DPP-FPHD1 - Manual (Page 10)

10
Remote control
A SLIDE SHOW button (page 17)
B PRINT button (page 18)
C MENU button*
• Functions operate the same as the MENU
buttons on the camera.
• However, “Retouch” function of the
Viewing menu cannot be used.
D 1 (on/standby) button (page 17)
• To turn on the printer, press 1 to turn on the
1 indicator in yellow green.
• To turn off the printer, press 1 again to turn
on the 1 indicator in red.
E
(Index) button
• Press the side to switch to the index
screen.
• Press the side again to switch to the
index screen with smaller thumbnails.
• Press the other side to return to the previous
index screen.
F Control buttons (v/V/b/B/ )*
• Press v / V / b / B to select the images or the
MENU items.
• Press to confirm the selection.
* For details, refer to the Instruction Manual
supplied with the camera and the Cyber-shot
Handbook.
PNotes
• Remove the insulation sheet before using the
remote control.
• Point the remote control towards the remote
sensor on the camera adaptor to operate your
camera.
To change the battery of the remote
control
1 While pressing on the tab, inset your
fingernail into the slit to pull out the
battery case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the remote
control until it clicks.
Caution
Risk of Explosion if battery is replaced by an
incorrect type.
Dispose of used batteries according to
instructions.
WARNING
Battery may explode if mistreated.
Do not rechage, disassemble or despose of in fire.
• The remote control has a button type lithium
battery (CR2025) built in. Do not use batteries
other than CR2025.
A
B
C
D
E
F
Insulation sheet
Tab